My Winter Car: The Ultimate Corris Rivett Building Guide (NOV2026)

What you need to know

To build the Corris Rivett, you'll need various parts from different sources, including Fleetari's Repair Shop and the PSK Market. The process involves assembling the engine, front suspension, and other components. You'll need to gather all the required parts before starting the assembly process. The guide will walk you through the steps to build the Corris Rivett.

Step by step

1. Gather all the necessary parts for the engine, including the crankshaft, main bearings, pistons, oil pump, and other components.
2. Insert the crankshaft into the engine block and install the main bearings.
3. Install the pistons, oil pump, and oil pan, and secure them with the required screws.
4. Assemble the cylinder head, rockers, and camshaft, and install them onto the engine block.
5. Install the timing belt, water pump, and alternator, and secure them with the required screws.
6. Prepare the clutch assembly by inserting the clutch disc into the clutch cover and placing the clutch pressure plate onto the assembly.
7. Install the clutch onto the flywheel and secure it with the required screws.
8. Install the front suspension components, including the steering rack, steering shaft, and front lower and upper control arms.
9. Raise the vehicle body using the jack and install the front shock absorbers and spring coils.
10. Install the front right and left brake assemblies and link them to the steering column.

Tips

• Make sure to tighten all screws securely to avoid any issues during the assembly process.
• Use the correct tools, such as the screwdriver and spark plug socket, to avoid damaging any components.
• When installing the timing belt, remove the crankshaft pulley first and then put it back on after installing the timing belt.
• To attach the engine to the engine hoist, place the toolbox on the floor and align the chains with the engine block until you hear a soft click.
• When installing the front suspension, raise the vehicle body using the jack to access the components easily.